Bradco 509 Operator's Manual download pdf (Page 45)

BACKHOE CHECKLIST

FOR USE WITH BACKHOES AND BACKHOE MOUNTING KITS

DEALER RESPONSIBILITY:

The following check list is to be completed by the equipment dealer. This checklist is to be completed

by the dealer at time of delivery. When purchasing a mounting kit for an existing backhoe it is the

equipment dealers responsibility to review this checklist with the customer and instruct them to check

each item at time of installation onto their prime mover.

BACKHOE:

1. _____ Check and lubricate backhoe. See “Lubrication Section” in Operator’s Manual.

2. _____ Visually inspect the backhoe for bent, loose, cracked, damaged or missing parts or any other irregularities

prior to operation.

3. _____ Verify backhoe control lever function and direction of operation are in accordance with the control lever

decals.

4. _____ Run cylinders through their full cycle to purge any air from the system. Recheck hydraulic system for cor-

rect hydraulic uid levels.

5. _____ Check all hydraulic connections for leaks and all hoses for proper positioning to reduce chang and bind-

ing.

6. _____ Check prime mover system relief valve pressure and compare and adjust to recommended operating

pressure listed in the “Specications Section” of the Operator’s Manual.

7. _____ Make sure decals are not damaged or missing and are in their right location. See “Decals Section” of the

Operator’s Manual.

8. _____ Customer instructed to read and understand Operator’s Manual before operating backhoe.

9. _____ Complete and return the manufacturers “Warranty Validation Form”.

MOUNTING:

1. _____ Check backhoe, mounting, and prime mover to ensure they are all compatible.

2. _____ Check backhoe mounting bolts for tightness. Instruct owner to retighten after the rst eight working

hours, and after every forty working hour interval thereafter. See “Bolt Torque Specications” in Opera-

tor’s Manual.

3. _____ If customer is installing the mounts and mounting the backhoe to the prime mover, the dealer must review

the proper mounting procedure and possible consequences of improper installation.

4. _____ Verify the owner is in possession of an operator’s manual and instruct them to read and understand all

safety and operating techniques.

OWNERS RESPONSIBILITY:

It is the owner’s responsibility to make sure that the dealer has completed this checklist and

instructed him/her on safe and proper operation of the backhoe. If installation instructions are unclear,

bring backhoe, mounting and prime mover to the equipment dealership for proper installation.

 Owner’sSignature        Date

 DealershipSignature        Date

F-1228 5-14-10

75475

1 2 ... 40 41 42 43 44 45 46 47

No comments

Bradco 509 Operator's Manual Page 45