Bradco 511 Operator's Manual download pdf (Page 24)

OPERATING INSTRUCTIONS

TRANSPORTING

GENERAL INFORMATION

Follow the simple steps listed below when preparing the backhoe for

transportation between work sites. Read and follow the safety precautions

for backhoe transporting listed in Section B of this manual before moving

the backhoe.

1. Before transporting the backhoe, raise the boom, dipper, and bucket

to the transporting position.

2. Engage the swing lock (if so equipped) by pushing down and to the

left on the red swing lock ball handle.

3. Engage the boom lock by moving the boom lock handle to the left/

down therefore locking the boom to the swing post in the transport-

ing position.

4. Raise all stabilizers.

CAUTION! Be sure to install a SMV (Slow Moving Vehicle) sign on the

backhoe dipper before attempting to transport the backhoe.

When transporting the backhoe on a road or highway at night

or during the day, use accessory lights and devices for ad-

equate warning to the operators of other vehicles. In this

regard, check local government regulations.

Always drive slowly over uneven terrain to avoid tipping the

backhoe.

6747

6-3-98-2

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 56 57

No comments

Bradco 511 Operator's Manual Page 24